BACK:  

BUTT WELDING MACHINES FOR HDPE PIPE AND FITTINGS / SM160 PLASTIC PIPES HYDRAULIC BUTT WELDING MACHINE

SM160 PLASTIC PIPES HYDRAULIC BUTT WELDING MACHINE
    • Machine is for weldings of PE – PP – PVDF pipes and fittings up to 32 Bar .Welding sizes are 50 – 63 – 75 – 90 – 110 – 125 – 140 – 160mm
    • With the shortest setup time it provides simple and fast welding operations according to international standards ISO 12176 – 1
    • With it’s lightweight nature provides easy handling
    • Maximum working pressure is 150 Bar
    • The working environmental temperature is -10 C° ~+40 C°

      SM160 Hydraulic Butt Welding Machine Main Body

      The main body supports and centres the plastic pipes with two fixed and two movable clamps.

      Using the hydraulic pressure on the system, the two pistons on the carrying metal bars move the clamps for and backwards and supply the necessary movement for the welding process.

      SM160 Hydraulic Butt Welding Machine Trimmer

      The trimmer is the tool which cleans and smoothes the both ends of the pipes before the heating process with its blades on both sides.

      SM160 Butt Welding Machine trimmer unit ensures clean and parallel pipe faces

      SM160 Hydraulic Butt Welding Machine Heater

      The pipe ends will be heated by this heater before the welding process.

      The settings of the heater will be done by the thermostat on the control unit. SM160 Butt welding machine PTFE- coated heating element ensures uniform surface temperature.

      SM160 Hydraulic Butt Welding Machine Control Unit

      The necessary electric will be transfered to the heater and trimmer by means of this unit and to the main machine by the hydraulic pressure.

      It will be controlled by the manual buttons. On the manual control panel there are four buttons and a key. The clamps are controlled by the buttons and the trimmer by the key.

  • You can place your orders from the order form below..

Name product : SM160 PLASTIC PIPES HYDRAULIC BUTT WELDING MACHINE